Vitocal 200-A

When it comes to modernisation, the heat pump is well suited to dual mode operation. In this case the existing system remains operational to cover peak loads when temperatures are particularly low. This significantly improves system efficiency.

The  Vitocal 200-A in the monoblock design not only provides efficient and reliable heat in the winter months. It is also as quiet as a whisper.

The  Vitocal 200-A monoblock heat pump utilises the latent heat in the outdoor air for environmentally responsible and cost effective heating. It is available either solely for heating, or for heating and cooling.

These new outdoor units in their timeless design are very easy on the eye. These appliances with one or two fans are designed and manufactured in-house. Consequently, they offer very good performance data, an excellent finish and superb product quality.

The monoblock  Vitocal 200-A is designed for economical operation. All installed components are matched to each other, which means that the heat pump achieves a very high level of efficiency during operation. This high efficiency can be expressed in figures: according to EN  14511, the Vitocal  200-A achieves a COP (coefficient of performance) of up to 5.0 at an outside temperature of 7.0  °C and a water temperature of 35.0  °C. If the outside temperature is 2.0  °C and the water temperature is 35.0  °C, the COP is still 4.1.

The acoustic properties of the outdoor units of our monoblock heat pumps comply with advanced acoustic design (AAD) specifications. This involves optimising the frequency spectrum so that low sounds are shifted into a higher frequency range. There, they are perceived as less of a nuisance and can be better absorbed by the building substance.

The  Vitocal 200-A is therefore particularly well suited to densely built-up areas, such as terraced housing. You can also find detailed information about this in our knowledge section on  volume and sound of air source heat pumps.

The compact, wall mounted indoor unit, complete with hydraulics and control unit, is quiet and can be installed near the living space. The connection lines to the outdoor unit are filled with water. The installer does not need a special certificate of competence (refrigerant certificate) to install them. The refrigerant circuit is hermetically sealed, which means that a refrigerant leak test is not necessary. The high degree of pre-assembled components and coordinated accessories means the  Vitocal 200-A can be installed very quickly. You can also find detailed information about refrigerant circuits/refrigerants in this  short brochure.

• Maximum flow temperature up to 60  °C
  
• Monoblock indoor unit with high efficiency circulation pump, 3-way diverter valve and control unit
• Control of Viessmann ventilation units possible
  
• No refrigerant leak test due to hermetically sealed refrigerant circuit
• No minimum clearances required between indoor and outdoor units
• Energy efficiency class* A++ / A++ | type 201.A04: A++ / A+
  
  *Energy efficiency class in accordance with Commission Delegated Regulation (EU) No  811/2013 for heating, average climatic conditions –– low (35  °C) / medium (55  °C) temperature applications
  

For information on the refrigerant circuit/refrigerant, please refer to the short brochure.